RAD Config

Devices

Devices found on the RADBUS behind the connected master.

Status	Device	UID	Serial	Firmware	Airport DB	Default startup screen
No devices discovered yet.

Prefix Registration number

Airspeed Altitude Temperature Pressure Distance

Red arc Yellow arc Green arc Approach indicator Gear indicator

Sky (Upper) Sky (Lower) Ground (Upper) Ground (Lower) Airplane symbol

Daytime brightness 10 Nighttime brightness 5 Text background alpha 150 Show density altitude

Disable screens by unchecking them. Disabled screens will not be displayed on the device. At least one screen must stay enabled.

Enabled screens

Raw speed values, in whatever airspeed unit is selected above (0–255).

Enter 0 for Vs0 and Vfe to disable the white arc, or 0 to disable the approach speed or gear speed indicators.

Vmin Vs0 (bottom white arc) Vs1 (bottom green arc) Vfe (top white arc) Vno (top green arc) Vne (red line) Approach speed Vlo (gear speed)

Warning min (V) Warning max (V) Alert min (V) Alert max (V)

Roll correction (°) Pitch correction (°)

To disable a yellow arc, set its yellow start to the same value as its red start.

Yellow start + (G) Red start + (G) Yellow start − (G) Red start − (G)

Map orientation

Ownship ICAO (hex) Emitter category

ICAO address Use assigned ICAO above Random

Factory reset erases every connected device's stored settings back to firmware defaults.