Skip to content

AwesomeADSB

The FF_83 AwesomeADSB is a dual-band ADS-B receiver. It sends traffic to an AwesomeEFIS over RADbus and to phones, tablets and portable GPS units over WiFi.

AwesomeADSB

Specs

Input voltage 9-36 V DC
Current 125 mA. 1 amp breaker or fuse recommended.
Size 3.75" x 2.25" x 0.75"
Weight 85 grams
Supported hardware RADaero AwesomeEFIS

Supported applications

  • ForeFlight
  • Garmin Pilot (iOS only)
  • Seattle Avionics FlyQ+ EFB
  • Avare and AvareX
  • FltPlan Go
  • AeroADSB
  • WingX
  • 8Flight Aviator

Testing of other applications and hardware is ongoing. If yours isn't listed, email support@RAD.aero.

What's in the box

AwesomeADSB box contents

  • AwesomeADSB (FF_83)
  • 1090 MHz antenna
  • 978 MHz antenna
  • Wiring harness
  • Ring terminals (2 sizes) with heat shrink
  • 3x mounting screws, 6-32 x 1/4"

Device overview

AwesomeADSB with the USB and main connectors, network, 978 MHz and 1090 MHz activity LEDs, and both antenna connectors labelled