Skip to content

AwesomeADSB operation

Connect over WiFi

The receiver hosts a WiFi network and broadcasts traffic following the GDL 90 spec.

  1. Power on the receiver.
  2. Connect your phone, tablet or GPS to its WiFi network:

    Network name radaero- followed by 6 digits
    Default password radaero83

Most applications start displaying traffic automatically. If yours doesn't, make sure it is using port 4000.

Configuration page

  1. Connect to the receiver's WiFi network.
  2. Open a browser and go to http://192.168.4.1.
Setting Description
SSID and Password The WiFi network name and password
CAN Termination Turns RADbus termination on or off
Save Settings Saves your changes
Update Firmware Installs a firmware file
Download Settings, Restore Settings Backs up settings to a file and restores them

New settings take effect after the power is cycled. If you change the network settings, you will need to re-establish any connections you previously set up.