AwesomeEFIS updates¶
Update firmware and the airport database from the RAD Config webapp.
Update firmware or the airport database¶
- Connect to the EFIS.
- In the Devices card, check the installed versions. The update buttons only appear when a connected device is behind the latest release.
- Click Update Firmware or Update Airport DB and confirm.
- Wait for the progress bar to finish. Do not close the tab, disconnect the device, or lose power during the update.
- When the firmware has been sent to all devices, click Reboot Devices at the top right of the configuration page to install it.
After the reboot, the new firmware is installed and verified. A progress bar is shown on the EFIS during installation, and the device reboots once more when it is complete.
Extra Displays are updated through the EFIS over RADbus, so you don't need to connect each Extra Display over USB.
Firmware files can also be downloaded manually from RAD.aero/downloads.