AwesomeADSB updates¶
There are two ways to update the firmware. Use RADbus if the receiver is connected to an AwesomeEFIS.
Update over RADbus¶
- Connect to the EFIS with the RAD Config webapp.
- In the Devices card, click Update AwesomeADSB and confirm. The button appears when an update is available.
- Do not close the tab, disconnect the device, or lose power during the update. If the update is interrupted, the receiver keeps running its current firmware.
Older receiver firmware can't be updated this way. The webapp tells you when this applies and links to the firmware download, so you can update over WiFi instead.
Update over WiFi¶
- Download the latest
.otafirmware file from RAD.aero/downloads to your computer or phone. - Connect to the receiver's WiFi network and open http://192.168.4.1.
- Click Update Firmware and select the file.
- Wait for the progress bar to finish. The device reboots and installs the new firmware.
The receiver is ready to use when the green network LED begins blinking again.